Read Reviews 317-339-7212

There are seven primary types of residential roofing systems: shingle, slate, tile, wood shake, metal, composite, and flat roof membranes. Each system has its own performance characteristics and distinct advantages. Ford’s Custom Construction is a contractor who has extensive experience in installing, maintaining and repairing each of these roofing systems.

We have acquired the knowledge and expertise on the specific details of each type of roofing material. This experience allows us to evaluate your home’s particular characteristics and effectively recommend solutions that will meet your needs. From shingle roofs to copper standing seam metal roofs, Ford’s Custom Construction is a contractor that can help with your residential roofing needs.

Types Of Roofing Systems

Asphalt Shingles

Asphalt shingles are composed of organic felt or glass-fibers that provides support for the weather-resistant components and gives a shingle strength; asphalt and fillers; and surfacing material, generally in the form of mineral granules, that provides protection from impact and UV degradation and improves fire resistance.

Shingles may be produced in a single layer or two or more layers. They are generally are known as laminated strip shingles, or architectural shingles, and they have a three dimensional appearance.

Both 3-tab asphalt shingles and laminated asphalt shingles contain a strip of factory applied adhesive that is activated by the sun’s heat after installation and seals each shingle to the next course. The seal strip also provides much of a shingle’s resistance to wind uplift. Shingles with factory-applied adhesive have a strip of clear polyester film applied to each shingle to prevent the sealing strips from bonding the shingles together when packaged. When the shingles are installed, the self-sealing strips will not align with the plastic film strips and will bond to adjacent shingles. For this reason, the plastic film strips do not have to be removed.

Metal Roofing 

There are three general categories of metal roof systems used for steep-slope roofing applications: architectural metal panel, structural metal panel and metal shingle/shingle panels. Generally, architectural metal panel roof systems are watershedding and are intended for use on steep slope roofs. Structural metal panel roof systems are used on low and steep slope roofs. Structural metal panel roof systems can be used on low slope roofs because of their hydrostatic, or water barrier, characteristics.

Roofing slate is a dense, durable, naturally occurring material that is essentially nonabsorbent. Two properties of slate are cleavage and fracture. It has natural cleavage, which permits it to be easily split in one direction. Fracture, usually occurring at right angles to the cleavage, is called the grain. Roofing slate commonly is split so the length of the slate runs in the direction of the grain. The surface texture of slate after being split for commercial use derives from the characteristics of the rock from which it was quarried. Some slate splits to a smooth, practically even surface, while other yields a surface that is rough and uneven.

Call us today for a Metal Roof Pricing.

Slate Roof

Roofing slate is a dense, durable, naturally occurring material that is essentially nonabsorbent. Two properties of slate are cleavage and fracture. It has natural cleavage, which permits it to be easily split in one direction. Fracture, usually occurring at right angles to the cleavage, is called the grain. Roofing slate commonly is split so the length of the slate runs in the direction of the grain. The surface texture of slate after being split for commercial use derives from the characteristics of the rock from which it was quarried. Some slate splits to a smooth, practically even surface, while other yields a surface that is rough and uneven.

The color of slate is determined by its chemical and mineral composition. Because these factors differ in various regions, roofing slate can be obtained in a variety of colors. In addition, exposure to weather causes slate to change color. The degree of change varies depending on the slate. Slate exhibiting minimal color change is known as “permanent” or “unfading” slate. Slate that shows a more marked color change is known as “weathering” slate. Between unfading slate and weathering is “semi weathering” slate.

Tile Roof

Clay tile is produced by baking molded clay into tile. The density of the clay is determined by the length of time and temperature at which it is heated. Tiles may be glazed and also may have surface texture treatments applied. As a result, there are a wide variety of tile profiles, styles, finishes and colors available. In addition, there may be separate accessory tiles—matched to each field tile design—of various shapes designed for use on ridges, hips, hip intersections and gable ends. Installation methods depend on the nature of the tile being installed; that is, whether it is two piece, one piece, interlocking or flat.

Concrete tiles are made of portland cement, sand and water in varying proportions. The material is mixed and extruded on molds under high pressure. The exposed surface of a tile may be finished with cementitious material colored with synthetic oxide additives. The tiles are cured to reach the required strength. They generally have lugs on their undersides for anchoring to batten strips. There are additional waterlocks or interlocking ribs on the longitudinal edges that impede movement and prevent water infiltration.

As with clay tile, there are a wide variety of profiles, styles, finishes and colors available. Color may be added to the surface of a tile or dispersed throughout (color through). Special texture may be added in surface treatment. Each type of tile roof system may make use of separate ridge, hip, hip intersection, gable end and finial accessory tiles of various shapes in addition to field tiles.

 

Cedar Roofing and Shake Roofing

 

Wood shakes and wood shingles are manufactured from western red cedar, cypress, pine and redwood trees. Shakes are split from logs and reshaped by manufacturers for commercial use. They are thicker at the butt end than shingles; generally one or both surfaces are split to obtain a textured effect. A split and resawn shake has a split face and sawn back. A taper sawn shake has a natural taper and is sawn on both sides. Wood shingles are sawn on both sides and have an even taper and uniform thickness. When applied to shingles, the industry terms “Perfection” and “Royal” mean 18 inch and 24 inch lengths, respectively.

Cedar shakes and cedar shingles are available pressure treated with fire retardants and chemical preservatives for increased fire resistance and to prevent premature rot and decay in some climates.

Pine shakes are made from southern yellow pine and are taper sawn. They also are available pressure treated with preservatives to protect against decay and insects. Interlayment felts are required for pine shakes.

 

Flat Roofing

Call Us today for more information on flat roofing systems

 

 

 

FREE INSPECTION